Logo
Company Profile      Section Fabrication      Section Bending Rolls

 
Metal Fabricating Machines to Bend-Cut Steel Sheets-Plates-Tubes-Sections
Δ Sheetmetal Working Machines    Δ Plate Working Machines
Δ Angle Fabrication Machines         Δ Beam Fabrication Machines      
Δ Tube Fabrication Machines          Δ Section Fabrication Machines

 
 We Offers Full Range of Machines To Fabricate Sections-Flats-Angles-Channels-Beams-Bars
3-Roll Bending- Straightening-Cambering-Punching- Notching- Marking-Cutting-Drilling- Chamfering- 3D Profile Cutting
 
We Also Offer Machines for Towers for Power Transmission, Telecom and
other industries fabricating of Iron Angles.
 
Section Bending Rolls

Machines to bend sections to large diameter arches, rings, coils, spirals.
Profiles That Can Be Bent
Δ Flats             Δ Square Bars       Δ Square-Rectangular Tubes
Δ Round Bars    Δ Round Tubes      Δ Round-Oval Pipes
Δ Angles          Δ Channel             Δ I Beams Δ T-Beams
Δ Roll Formed   Δ Pressed Profiles  Δ Hat Sections Δ Aluminium Extrusions
 
 
 
 
In Pyramid design, bottom rolls rotate along fixed axis. While top roll moves up- down to bend the profile. It is economical, rugged design but results in long flat ends which need to be cut or pre-bend separately if undesirable.
 
In Double Pinch design, both bottom rolls traverse up-down allowing curving of even ends while top roll position is fixed. With all 3 rolls driven, jobs are rolled with minimal scratches. Ideal for bending full circles, rings. Can from smaller diameter rings compared to Pyramid machines.
 
DS-50
Angle 2"- Pipe 2"- Flat 2.1/2"
DS-60
Angle 2.1/2"-Pipe 2.1/2"-Flat 3" 
 
SBR-DP-40
Angle 2"- Pipe 2"- Flat 2.1/2"
SBR-DP-50
Angle 2"- Pipe 2"- Flat 2.1/2"
 
DS-80
Angle 3"- Pipe 3.1/2"- Flat 4"
 
DS-120
Angle 4 "- Pipe 5"- Flat 5"
 
 
SBR-DP-70
Angle 2.1/2"-Pipe 2.1/2"-Flat 3"
SBR-DP-100
Angle 3"- Pipe 3.1/2"- Flat 4"
 
SBR-DP-200
Angle 10 "- Pipe7.1/2"-Flat 8"
                                       
    SBR-DP-300
Angle 10 "- Pipe7.1/2"- Flat 8"
 
SBR-DP-120
Angle 4 "- Pipe 5"- Flat 5"
 
SBR-DP-160
Angle 5 "- Pipe 6"- Flat 6"
 
The bend radius can be set by changing the position of rollers.
Most machines can work vertical or horizontal axes.
CNC versions allow an operator to alter the pressures during
bending cycle for elliptical or multiple radii bends.