Logo
Company Profile      Section Fabrication      Ironworker

 
Metal Fabricating Machines to Bend-Cut Steel Sheets-Plates-Tubes-Sections
Δ Sheetmetal Working Machines    Δ Plate Working Machines
Δ Angle Fabrication Machines         Δ Beam Fabrication Machines      
Δ Tube Fabrication Machines          Δ Section Fabrication Machines

 
 We Offers Full Range of Machines To Fabricate Sections-Flats-Angles-Channels-Beams-Bars
3-Roll Bending- Straightening-Cambering-Punching- Notching- Marking-Cutting-Drilling- Chamfering- 3D Profile Cutting
 
We Also Offer Machines for Towers for Power Transmission, Telecom and
other industries fabricating of Iron Angles.

Ironworkers - Steel Workers 

Combined Punching-Notching-Coping Machines
 
 
 
 
 
A "Must Have" For Any Fabrication Shop.
Has Four Or Five Tooled-Up Stations for :
 
♦ Punching ♦ Cropping ♦ Notching
♦ Shearing
of
♦ Plates ♦ Flats ♦ Angles ♦ Bars
♦ Channels ♦ I-Beams
 
Without It Your Shop Might Need 4 To 12 Separate Machines:
  • Punching Faster Than Drilling
  • Shearing Faster Than Bandsaw
One Power Cylinders IWS Series
Operates 4 Stations to Punch-Shear-Notch
Steel Plates-Flats-Angles-Bars-Beams 
 
TWO Power Cylinders IWD Series
One for Punching Station. Another for 4 Cutting Stations
 to Shear-Notch Steel Flats-Angles-Bars-Beams
 
Model IWS-40 IWS-45 IWS-60
Working pressure Tons 400 450 600
Punching Capacity Dia. X Thk mm 26x10 24x12 28x15
Throat Depth Standard mm 175 175 220
Flar Bar Shear mm 200x10 200x12 200x15
Angle Cutting 90° mm 80x8 100x10 125x12
Round / Square Bar Shear mm 30/25 30/30 40/35
Channel / Beam Shear mm 65x40 80x43 100x48
Model IWD-55/110 IWD-75/150 IWD-110/220 IWD-120/240
Working pressure (KN) 55 75 110 140
Max capacities (mm) 25 x 16 30 x 20 35 x 25 38 x 26
Depth of throat (mm) 300 355 400 600
Flar Bar 250 x 16 330 x 20 330 x 25 355 x 30
At 90°cut 125 x 12 140 x 14 160 x 14 180 x 16
Round / Square Bar 45/ 40 50/ 50 60/ 50 65/ 55
 
 Close-Ups of Tooling Stations
 

 

 
 Factory Photos